Double Non-Contact Pusher Type Seal
◆Double seals face pressure push type seal
◆Pump suitable for enlarging cavity
◆It is used in the condition that hazardous pumping medium is not allowed to be discharged
◆The APG groove can realize low speed suspension, low gas leakage and no sealing surface contact, and the power required to achieve the same flow and head is 25% less than that of the sealless pump
◆The spring preloaded 0-ring design provides consistent load and low friction damping, thereby reducing seal surface sticking
◆The inert gas is used to isolate and pressurize the sealing surface to realize the buoyancy, and the buffer solution is used to
reduce the pollution of the pumping medium
◆he pump can be allowed to deviate from the design conditions, including vibration, cavitation and dry operation
◆Easy to install and pressurize
Pressure: 34.5 bar (500 psi)
Temperature: - 40℃ to 260℃
Speed: 1.3 to 25 m/s
Shaft diameter: 25.4 to 152 mm
(1.000 to 6.000inch)
Ask For Quote Now !
Ningbo Tiangong Mechanical Seals Co., Ltd.
ADD: No.18 Gaoya Road, Jiangshan Science and Technology Zone, Yinzhou District, Ningbo
ADD: No. 65, Mingke Road, Jiangshan Town, Yinzhou District, Ningbo, Zhejiang, CHINA 315191
Post Code: 315191
Just fill in your contact information below, we will contact you within 24 hours!
Your privacy is important to us, we will never leak out your personal information to anyone else.